AIRTAC X T1P MK23/SSX303/SSX23 Shotgun Shell HPA Adapter - PLUG AND PLAY

AIRTAC X T1P MK23/SSX303/SSX23 Shotgun Shell HPA Adapter - PLUG AND PLAY - Image 2

AIRTAC X T1P MK23/SSX303/SSX23 Shotgun Shell HPA Adapter - PLUG AND PLAY - Image 3

AIRTAC X T1P MK23/SSX303/SSX23 Shotgun Shell HPA Adapter - PLUG AND PLAY - Image 4

AIRTAC X T1P MK23/SSX303/SSX23 Shotgun Shell HPA Adapter - PLUG AND PLAY - Image 5

AIRTAC X T1P MK23/SSX303/SSX23 Shotgun Shell HPA Adapter - PLUG AND PLAY - Image 6

AIRTAC X T1P MK23/SSX303/SSX23 Shotgun Shell HPA Adapter - PLUG AND PLAY - Image 7

AIRTAC X T1P MK23/SSX303/SSX23 Shotgun Shell HPA Adapter – PLUG AND PLAY

Name: AIRTAC X T1P MK23/SSX303/SSX23 Shotgun Shell HPA Adapter - PLUG AND PLAY
Brand: T1P
SKU: MK23-SSA-BASE
Price: 100.00 GBP
Availability: InStock

SKU : MK23-SSA-BASE

Now available from : £100.00

1 in stock

Description Delivery Returns

The definitive MK23 HPA Adapter.
We’ve replicated a MK23 magazine, and adapted it to take HPA, fed by 30 round shotgun shells.

Massively improved ergonomics and magazine catch feel (compared to our previous generation of MK23 shotgun shell adapters).
CNC Aluminium magazine baseplate
High internal volume for good FPS/PSI.
Compatible with all clone MK23 and Novritsch SSX23/303
TM Feed lips may be required when using with a TM MK23
Two small grub screws are fitted to the adapters mag catch area, you can loosen these to reduce the distance from adapter to nozzle, improving air-seal and FPS. If you want to get higher FPS, run a tighter barrel, a higher flow nozzle (SSX23/303 users), or a stronger hammer spring.

AIRTAC Adapters
Each of our adapters is designed to be low profile while reaching field limit FPS. We design and manufacture all of our products to the highest standard, and do not charge extra for ‘premium’ features. Where applicable this adapter features:
Lifetime Warranty (Our adapters have to be built to last)
Injection moulded or CNC magwell that is impervious to BB strikes at point blank skirmish FPS.
CNC or Injection moulded Feed Tubes and Magazine Catches for lifelong durability.
Tuneability/compatability via integrated shim systems. Our adapters are designed to cope with ‘airsoft tolerances’
Gas Routers injection moulded from NBR, 1:1 with the factory gas router.
We test every HPA adapter we sell
Seal Test
Firing test, for feed and recoil (we have over 100 guns on site for testing)
Compact MP5
Shotshell HPA Adapter Information
Sites that do not usually allow HPA adapters in pistols should have no problem with these adapters, due to their low capacity, and covert profile.
Compatible with most airsoft shotshells. We recommend CYMA or Golden Eagle shells, as they have the strongest springs (TM Shells are not as good). CYMA Shells Available Here
0 BBs are dropped when shell is empty (adapter will feed all 30 rounds of shell)
An ambidextrous magazine catch is present at the rear of the adapter allowing easy shell drops
Three feed tubes of different lengths are included. Sometimes, due to manufacturing tolerances of the shells, you may need to swap out the feed tube already pre-fitted to give the best feeding results. This video demonstrates how simple this is
Key Information
We use a US Foster Fitting as standard. This is the most common airsoft HPA fitting. EU fittings can be purchased separately.
Some of our HPA adapters have a smaller internal volume than gas magazines. Because of this, you will need to use a PSI of 90–150.
If you need higher FPS, you can:
Fit a tighter barrel
Use a longer barrel
Use heavier BBs
Fit an improved hop bucking
If your replica has an NPAS fitted, we advise opening it fully.
Do not exceed 150 PSI. Many airsoft guns will not see an increase in FPS past this, as the hammer may struggle to depress the valve correctly.
Insert the HPA adapter with your bolt / slide locked back to minimise pressure against the nozzle loading arm.

DO NOT EXCEED 150PSI WITH ANY AIRSOFT HPA ADAPTER. ALWAYS USE AIR REGULATED BY A SECONDARY REGULATOR (EG AT200, WOLVERINE STORM, POLARSTAR MRS). CHECK YOUR PSI BEFORE CONNECTING AIR TO A HPA ADAPTER. NEVER CONNECT OUR EQUIPMENT TO PAINTBALL AIR TANKS OR CO2 TANKS. NEVER CONNECT OUR EQUIPMENT TO A TIPPMAN STYLE HPA LINE

We aim to SHIP your purchase within 2 business days, usually less. If this is not possible, we will contact you as soon as we can. We cannot be held responsible for delays due to the Courier Service or Post Office Royal Mail. Please allow up to 4 days for delivery, depending on your chosen shipping option.

UK Delivery: For details of our shipping charges please view our Shipping Policy.

Please Note: We currently only ship within the UK, we do not ship outside the UK or overseas.

As the delivery is provided via a courier service it is important that you ensure there will be someone available at the delivery location to sign for the parcel. No refund of the delivery cost will be made for failed deliveries where there has been no-one available to accept the parcel.

If you wish to return any items, please contact us either via email (info@urbanairsoftuk.com) or on the phone (01924 899 109)

Returns address:
Fear Masters Entertainment Ltd
t/a Urban Airsoft Store
Exchange Buildings
Exchange Street
Normanton
West Yorkshire
WF6 2AA

* Please note this is our Head Office and Shop.

Other great products you may be interested in

View all products

Shop By Product

Shop By Category

Shop By Product

Shop By Category

AIRTAC X T1P MK23/SSX303/SSX23 Shotgun Shell HPA Adapter – PLUG AND PLAY

Other great products you may be interested in

ASG Micro Dot Sight Red

YOKO Hi-Vis Pull Over Hoodie...

Jack Pyke Resetting Spinner...

KWA M1911 A1 Magazine

Mil-Com Quick Release Pistol...

Strike Systems Advanced 552...

NUPROL BATTLE PRO’S...

ASG 3V Lithium Battery,...

Do you need to speak to a member of our team?

Why choose Urban Airsoft UK

Price Match Policy

Expert Gun Servicing

Next Day Delivery

Two Tone Service